Home / Guides / Shift Work / How to Compare Worked Hours With Contracted Hours

How to Compare Worked Hours With Contracted Hours

To compare worked hours with contracted hours, subtract your contracted hours from the hours actually worked.

The basic calculation is: Worked hours − contracted hours = difference

For example, with 37h30m contracted and 38h45m worked, the difference is +1h15m, so the worked total is 1h15m over the contracted hours.

If the result is negative, the worked total is below contract. If the result is zero, the worked hours exactly match the contracted hours.

Compare Your Hours

What are contracted hours?

Contracted hours are the number of hours someone is normally expected to work over the period stated in their employment arrangement.

For example, 37h30m per week or 30 hours per week.

These provide the baseline that actual worked hours can be compared against.

Contracted hours are not necessarily the same as the hours shown on a particular week’s rota.

What are scheduled hours?

Scheduled hours are the hours someone is planned to work. They may also be described as rota hours, planned hours or rostered hours.

  • Contracted hours: 37h30m
  • Scheduled hours: 39h

The rota is therefore planning more hours than the normal contracted weekly total.

That does not yet tell you how many hours were actually worked.

What are worked hours?

Worked hours are the hours that were actually worked and recorded.

  • Contracted: 37h30m
  • Scheduled: 39h00m
  • Actually worked: 38h15m

These are three different figures:

  • contracted hours = the baseline
  • scheduled hours = the plan
  • worked hours = what actually happened

When checking whether you worked over or under contract, it is usually the actual worked total that needs to be compared with the relevant contracted total.

How to calculate the difference

Use:

Worked hours − contracted hours = variance

For example, with 38h45m worked and 37h30m contracted:

38h45m − 37h30m = 1h15m

So the result is +1h15m, meaning the worked total is 1h15m above contract.

Example: worked more than contracted hours

Suppose the weekly contract is 30h and the actual worked total is 32h15m.

32h15m − 30h00m = 2h15m

The employee has therefore worked 2h15m over contract.

This identifies the time difference only. It does not automatically mean those 2h15m are paid as overtime.

Example: worked fewer than contracted hours

Contracted 30h, worked 28h45m:

28h45m − 30h00m = −1h15m

The worked total is 1h15m under contract.

A negative result simply shows that the recorded worked hours are below the contracted amount.

There may be a valid reason for the difference, such as annual leave or another authorised absence.

Example: worked exactly the contracted hours

Contracted 37h30m, worked 37h30m.

Difference: 0h

The actual worked total exactly matches the contracted weekly hours.

Contracted vs scheduled vs worked hours

A simple comparison might look like this:

Hours typeExample
Contracted37h30m
Scheduled39h00m
Worked38h15m
Difference from contract+45m

In this example:

  • the contract requires 37h30m
  • the rota planned 39h
  • 38h15m was actually worked

The worked total is therefore 45 minutes over contract, but 45 minutes below the rota.

This is why it is useful to keep the three figures separate.

What if the week includes annual leave or absence?

A simple comparison of worked hours with contracted hours does not always tell the full story.

  • Contracted: 37h30m
  • Worked: 30h
  • Annual leave: 7h30m

Looking only at worked hours would show 7h30m under contract, but the annual leave may account for that difference.

Other time that may need to be considered includes:

  • annual leave
  • sickness
  • training
  • authorised absence
  • other credited time

Exactly how these are recorded depends on the employer’s system and the circumstances.

The important point is not to assume that a lower worked-hours figure automatically means hours are missing.

Irregular shifts and part-time contracts

The comparison works the same way for part-time and irregular working patterns.

  • Contracted: 22h30m per week
  • Actual worked: 24h
  • Difference: +1h30m

The shifts do not need to be the same length each day.

You first calculate the total hours worked across the relevant week, then compare that figure with the contracted weekly hours.

For the first step, see How to Calculate Weekly Shift Hours.

Hours over contract are not automatically overtime

Working more than your contracted hours does not automatically mean those hours are overtime.

For example, with 30h contracted and 33h worked, the difference is +3h.

Those extra three hours might be treated as:

  • additional hours
  • overtime
  • TOIL
  • flexi-time
  • hours carried forward

depending on the employer, contract and working arrangement.

This page is only calculating the difference between worked and contracted hours.

If you need to calculate overtime after the relevant threshold is known, see How to Calculate Overtime in Decimal Hours.

How to track a running hours balance

Some workplaces allow hours to be carried forward from one period to another.

If that applies, the weekly differences can be combined into a running balance.

  • Week 1: +1h30m
  • Week 2: −30m
  • Week 3: +45m

+1h30m − 30m = +1h00m, then +45m = +1h45m

This type of running balance only makes sense where the relevant workplace actually operates a flexi-time, TOIL or carry-forward system.

Hours and minutes vs decimal hours

For this type of comparison, hours and minutes are usually easiest to read.

  • 1h15m = 1.25 hours
  • 45 minutes = 0.75 hours
  • 1h30m = 1.50 hours

If you convert the result to decimal hours, remember that clock minutes cannot simply be copied after the decimal point.

For example, 1h30m = 1.50, not 1.30.

For more detail, see Timesheet Hours and Minutes vs Decimal Hours.

How to compare weekly hours step by step

A simple process is:

  1. calculate the actual paid hours worked
  2. total the week
  3. confirm the relevant contracted weekly hours
  4. check whether approved leave or other credited time needs to be considered
  5. subtract contracted hours from the worked or credited total
  6. identify whether the result is over, under or exact
  7. only then consider any overtime, TOIL or flexi-time rules

For example, with weekly worked hours of 38h20m and contracted hours of 37h30m:

38h20m − 37h30m = +50m

The worked total is 50 minutes over contract.

Common mistakes when comparing worked and contracted hours

Comparing rota hours instead of actual worked hours

The rota is the plan. It may not match what was actually worked.

Assuming every extra hour is overtime

Hours above contract and overtime are not automatically the same thing.

Ignoring annual leave or authorised absence

A lower worked-hours figure may be explained by approved time away from work.

Mixing hours and minutes with decimal hours

For example, 37h30m = 37.50 hours, not 37.30.

Comparing different time periods

Do not compare one day’s worked hours with a weekly contracted-hours figure. Make sure both figures cover the same period.

Using gross shift hours instead of paid hours

If unpaid breaks need to be removed, use the paid working time rather than the total time on site.

Carrying hours forward when there is no carry-forward system

A running balance should only be used where the relevant working arrangement allows it.

Compare your worked and contracted hours

Calculate your actual weekly total first, then compare it with the contracted requirement.

For example: 37h30m contracted, 38h45m worked = +1h15m, or 37h30m contracted, 36h45m worked = −45m

Compare Your Hours

Frequently asked questions

How do I compare worked hours with contracted hours?

Subtract the contracted hours from the hours actually worked.

For example: 38h45m worked − 37h30m contracted = +1h15m

What does a positive result mean?

A positive result means the worked total is above the contracted total.

For example, +2h means two hours over contract.

What does a negative result mean?

A negative result means the worked total is below the contracted total.

For example, −45m means 45 minutes under contract.

What if the worked hours exactly match the contract?

The difference is 0 hours.

Are hours over contract always overtime?

No.

Hours above contract may be treated differently depending on the employment arrangement.

They could be additional hours, overtime, TOIL, flexi-time or another category.

Should annual leave be considered when comparing hours?

It may need to be considered if the employer records annual leave or other approved absence as credited time.

A raw worked-hours total does not always show the full picture.

What is the difference between contracted and scheduled hours?

Contracted hours are the normal baseline requirement.

Scheduled hours are the hours placed on the rota. The two figures can be different.

What is the difference between scheduled and worked hours?

Scheduled hours are what was planned.

Worked hours are what was actually completed and recorded.

What is 1h15m in decimal hours?

1.25 hours, because 15 ÷ 60 = 0.25.

What is 45 minutes in decimal hours?

0.75 hours, because 45 ÷ 60 = 0.75.